#DIMENSION CATALYSTEX 4.5 DOWNLOAD REGISTRATION#

There is two banded anilox rolls with various screening.ДЈ Anilox rolls Anilox rolls FISCHER & KRECKE ROTOVA 300 Plates The standard thicknesses of the plates are 1.14 and 1.7 mm, but 2.84 mm is also possible (Table 3). Flexo printing can be performed with solvent, water or UV inks on paper and board.

The Rotocolor Rotova 300 has an interchangeable flexo unit with controllable impression setting. The press is equipped with an adjustable electric assist for rotogravure. Printing on board with solvent or water based inks can be performed at lower speeds. In rotogravure on publication paper with toluene based ink the speed is 500 m/min. Rotocolor Rotova 300 is a single-colour, narrow web press for rotogravure and flexo printing. The press is used in the development of paper to meet high demands on print quality. It is a web press providing excellent possibilities to perform relevant test printings in rotogravure and flexography. TECHNICAL SPECIFICATION Printing techniques: Rotogravure with electric assist and Flexography with controllable impression setting Single colour: Toulene based and for Flexographic printing solvent based, water based and UV ink Printing speed: 500 m/min less with board Printing width: 300 mm minimum 200 mm Core diameter: 76 mm or 15 mm Roll diameter: 1000 mm Roll width: 320 mm Roll weight: 300 kg Rotocolor Rotova 300 (Rotocolor AG Druckmaschinenfabrik, Lyss, Schweiz) is an example of Broby Grafiska s test printing resources.

#DIMENSION CATALYSTEX 4.5 DOWNLOAD REGISTRATION#

smartgps All registration and impression related set-up is done at the plate mounting stage with almost no additional time required. SPRECIFIKATION F & K FLEXOPRESS 6S CI-Press, Central Impression Printing Press Automatic Slice System Circumference 460, 470, 480, 650 mm Plate thickness 1.14 mm and 1.70 mm Treating is not possible Printing units 8 st Maximum substrate web width 1300 mm Minimum substrate web width 650 mm (but we have printed 300 mm) Maximum print width Maximum printing speed Minimum printing speed Maximum roll diameter Maximum weigh of roll Socket diameter 1250 mm 400 m/min 31 m/min 1000 mm 1250 kg 76 mm and 150 mm Waterbased and solventbased Smallest amount of colour when printing 30 kg/coloor unit Substrate thin film thick cardboard g/m 2 When printing on thick substrate, > 250 g/m 2 the maximum material width is limited to maximum 900 mm.

If the automatic splice system is to be used the roll diameter can not exceed 800 mm. The maximum roll diameter is 1000 mm and maximum weight of 1250 kg. The substrate is wound up on a socket with a diameter of 76 or 150 mm.

The maximum substrate web width is 1300 mm (minimum 650 mm but 300 mm is possible) and the print width 1250 mm, but at maximum grammage the maximum web width is less than this. The grammage may vary from 30 to 350 g/m2. foil, flexible materials, and paper and carton board. A variety of substrates can be printed, e.g. The press has a maximum printing speed of 400 m/min and a minimum printing speed of 31 m/min and an automatic splice system. For web inspection, register control and print defect detection during printing, the press is equipped with a video camera system (Web Video 3000, Eltromat, LeopoldshГ¶he, Germany) and for spectral colour (L a b) and print density measurements, spectracon (Theta System Elektronik GmbH, MГјnich, Germany). The central cylinder has eight surrounding printing units with intermediate station dryers. The press has an autoclean ink-washing system for anilox roll, doctor blade and ink hoses. The printing press has automatic viscosity control and temperature control of the ink (COLORControl 3000, Drucktechnik Bloss, Leonberg, Germany). The press can be used for printing trials using water-borne or solvent-borne ink. FISCHER & KRECKE FLEXPRESS 6S ROTOCOLOR ROTOVA 300 The printing press (Figure 1) at Broby Grafiska is a CI Flexo printing press (S6-8, Fischer & Krecke, Bielefeld, Germany). A sketch of the Rotova press at Broby Grafiska. A sketch of the CI-printing press at Broby Grafiska. 1 printing graphic design packaging design photography scriptwriting broby grafiska graphic research web design digital media arts Flexographic Ci-Printing Press Rotova Press BROBY GRAFISKA UTBILDNING COLLEGE OF CROSS MEDIAДў Some technical specifications of flexographic CI-printing press at Broby Grafiska Some technical specifications of Rotova press at Broby Grafiska Tryckpress Rotova Figure 1.

Dimension catalystex 4.5 download